ENAR
Get a Quote
Products

Sixteen models. One interlock.

All tiles are 400×400 mm (6.25 tiles per m²) in polypropylene, with a male-and-female interlock on opposite edges — installed by hand, no adhesive. Ramp edging (400×60/70 mm) and corner pieces are available in matching colors.

Multicolor interlocking tile texture wall
18 mm

WNH01 – WNH09 · nine models

400–600 g per tile. The standard choice for garages, workshops and detailing bays.

Grey checker-plate interlocking tile
20 mm

WNH10 – WNH12 · three models

520 g per tile, deeper profile, 400×70 mm ramp edging for heavier traffic areas.

Red single interlocking tile with drainage pattern
30 / 40 mm

WNH13 – WNH16 · four models

High-profile tiles for industrial floors. Specifications confirmed per order — see note below the table.

Specification table

ModelThicknessTile weight≈ Weight / m²ColorsTypical use
WNH0118 mm520 g ±10 g≈ 3.25 kg6 basicGarages, general workshop
WNH0218 mm400–460 g ±10 g≈ 2.50–2.88 kg6 basicLight-duty, exhibitions
WNH0318 mm500 g ±10 g≈ 3.13 kg15 colorsDetailing studios, retail
WNH0418 mm500 g ±10 g≈ 3.13 kg15 colorsShowrooms
WNH0518 mm600 g ±10 g≈ 3.75 kgOn requestBusy workshops
WNH0618 mm600 g ±10 g≈ 3.75 kgOn requestBusy workshops
WNH0718 mm600 g ±10 g≈ 3.75 kg6 basicCommercial floors
WNH0818 mm600 g ±10 g≈ 3.75 kg6 basicCommercial floors
WNH0918 mm600 g ±10 g≈ 3.75 kg6 basicCommercial floors
WNH1020 mm520 g ±10 g≈ 3.25 kg6 basicWet & washdown areas
WNH1120 mm520 g ±10 g≈ 3.25 kg6 basicWet & washdown areas
WNH1220 mm520 g ±10 g≈ 3.25 kg6 basicService areas
WNH1330 mmon request *on request *6 basicIndustrial floors
WNH1430 / 40 mmon request *on request *6 basicIndustrial floors
WNH1530 / 40 mmon request *on request *6 basicHeavy-use areas
WNH1630 / 40 mmon request *on request *6 basicHeavy-use areas

* For the 30/40 mm models we confirm the exact tile weight, per-m² weight and mechanical data in writing with every quotation, because these figures are being re-verified with the production line. Colors: black, grey, red, blue, green, yellow (6 basic); extended card with orange, purple, pink and apple green available on selected 18 mm models.

Close-up of tile edge showing the interlocking profile
System parts

Tiles, ramps, corners — one order

  • ✓
    Field tiles 400×400 mm, male connector on one edge, female on the other.
  • ✓
    Ramp edging 400×60 mm (18 mm tiles) or 400×70 mm (20 mm tiles), bevelled for vehicle entry.
  • ✓
    Corner pieces in six colors, for edging turns and bay layouts.
  • ✓
    Installation interlock by hand over any firm, level base — concrete, asphalt or compacted gravel. A two-car garage is a same-day job.
Request the data sheet